First unbolt regulator from glass retaining plate (the metal plate the
window in pressed into), then using button on console retract mechanism all
the way down.
Now, here's the possibly tricky part: on my car there are 3 cutouts on the
door panel which allow access to the 3 ea. 5 mm allen headed bolts which
hold electric motor onto regulator. You have to unbolt motor and leave in
door when you remove regulator.
If the access holes aren't there, the MB Body/Chassis manual provides
precise instructions on where to drill holes.
Once motor is removed, unbolt regulator from door panel, slide aft, pull
from door. Hope this helps!
Jay Shuberger
